Helpful Tools and Tips for Hand Carved Stone
There are a several options available to you when exploring the different techniques and tools you can implement to hand carve stone wall art. Through years of trial and error I have found a few things that work best for me when working with my chosen medium of sandstone and some things to steer clear of. I have learned that it is necessary to use a variety of tools not limited to but including putty knives, chisels, diamond bits and burrs, and even hammer drills to get my desired result. In this article I will cover only the technical issues of carving on the stone and will discuss getting a feeling for each stone and tips for bringing out its true beauty in latter articles.
First let’s talk a bit about some misconceptions regarding stone carving and sandstone wall art that I have run across. One of the biggest misconceptions about sandstone is that it is a soft stone. On the contrary it is very abrasive and if the wrong tools are used it will eat up your equipment very quickly including tools coated in tungsten carbide and even titanium carbide. Another misconception is that soaking a piece of sandstone in water will make it softer and more easily carved. Not true, what water will help with is the life of your bits and chisels and keeping the dust down.
Now here are a few things that I have found work. One of the best tools for the initial stabilization of each stone is a hammer drill. All though it is truly amazing to watch the stone wear down the steel chisels of the hammer drill to a mere nub. The stabilization process is completed with a plain, old fashioned, putty knife and yes they get worn down, too. It is always great feeling when I wear my tools down to their handles. During these steps it is helpful to keep your stone moist just to restrict the dust. As for carving the final images in the stone wall art I have found nothing works better than diamond tipped chisels, bits and burrs. Now here is where the water really comes into play. You must keep your diamond covered tools cool. If you don’t the adhesive will over heat and all your diamond chips will fall off whatever surface they have been adhered to making your chisels, bits or burrs useless.
I have covered briefly some of the tips and techniques that I discovered work well for hand carved stone wall art particularly if you are working with sandstone. As you can see it is not a highly technical field and can be entered into with a variety of low cost tools. It takes a lot of heart and a bit of determination but with the right equipment and a vision of what you would like to accomplish hand carved stone is a very rewarding endeavor. Never be afraid to try different tools and different techniques as this is how we learn what works and what we should stay away from. I know I will be trying new things and will keep everyone posted of my discoveries.
About the Author
Ron White, stone carver and entrepreneur, has been carving stone since 1993 and is shown in more than 40 galleries across the US. Prior to beginning his work with hand carved stone Ron has worked extensively with leather, wood cabinetry and even jewelry. Learn more about Ron White, his work, or purchase your own selection at http://www.derivedfromnature.com.
Whittling The Novelty Handle Carving Knife Part 1
|
|
Bear Paw Meat Handler Forks $9.95 Bear Paws are like an extension of your own hands. Made from hard, durable plastic, they are perfect for lifting hot food items from the pan to the platter. Securely holds food while carving. Perfect as a meat shredding tool…. |
|
|
Victorinox 47547 10-1/4-Inch Wavy Bread Knife, Black Fibrox Handle $23.50 Nothing is worse than going to cut with your bread, and having the handle slip around in your hand. To combat this potential for injury, Victorinox has created this Fibrox bread knife. The Fibrox® handle is textured and provides a firm grip, even when wet, and does not slip or slide around. It is comfortable and fits naturally to the shape of your hand, and provides an attractive and modern styli… |
|
|
Chicago Cutlery Walnut Tradition 10-Inch Serrated Bread/Slicing Knife $12.29 Chicago Cutlery, 10″ Carbon Steel, Slicer Knife, Rust, Stain & Corrosion Resistant, Hand Ground To Produce A Taper Ground Edge, Full Tang, Walnut Handle With 3 Brass Rivets, Slices Breads & Meats…. |
|
|
Dremel 225-01 Flex Shaft Attachment $23.79 Dremel Moto-Tool Flex Shaft with Comfort Grip Handpiece allows fingertip control to cut, grind, sand, polish and more 36″ Long Cable, 1/2″-Diameter SlIM Grip Hand Piece Integrated shaft lock button – for easy accessory changes. For use with Dremel models 275, 285, 395, 398, 780 and 800… |
|
|
Gerber 22-47162 Fast Draw Spring Assisted Opening Stainless Steel Fine Edge Knife $24.84 With spring-assisted technology, the Gerber Fast Draw Knife deploys quickly and easily with one hand. This fine edge knife can be triggered using the thumb stub or with a sudden release of the index finger. The Fast Draw features a high carbon surgical stainless steel blade and tactile texturing on nylon handle. The blade measures 2.99 inches in length. A sturdy pocket clip keeps it close at hand…. |
|
|
Wood Carvers Basic Tool Set With Straight Handles- 6 Piece $20.95 Designed with the beginning carver in mind, this 6 piece set of wood carving tools has very sharp tool steel blades fixed into lacquered, solid wood handles with a long, cigar shape design. The blades have been selected to offer the most important styles and sizes for a variety of carving projects. Included are straight and bent gouges, straight and angled chisels and a “V” shape skew. The blades … |
|
|
Walking Cane – Natural chestnut wood walking stick, knob handle, scorched, with carved double spiral, with genuine leather starp, 36 long with rubber tip. $77.99 Natural chestnut wood walking stick, knob handle, scorched, with carved double spiral, with genuine leather strap, 36″ long with rubber tip… |
|
|
Walking Cane w/ Greyhound Dog Head Handle, Wood Style This cane has an Greyhound Dog Head Handle in faux wood. The faithful greyhound has long been a Symbol of Loyalty and Speed.The faux wood is made of cellulose of acetate and convincingly replicates genuine carved wood, while keeping the price of this cane in the affordable range. The shaft is made of solid Beech Wood. Beech Wood is known to be close and even in texture, hard, fairly strong, and du… |
|
|
P.K. Thomas Waxing Instrument, Green, L-PKT2 $12.95 P.K. Thomas Waxing Instrument, Green, L-PKT2. The featherweight aluminum handle of this instrument offers an extremely comfortable handling to reduce hand and wrist fatigue. The curved and papered points are used to flow molten wax on…. |
|
|
Mercer Cutlery Genesis 4-Piece Carving Knife Set $46.09 A supplier to the vast majority of cooking academies, Mercer Cutlery offers the Genesis Collection of kitchen knives to provide professional quality to the home chef. Comfortable, durable, and efficient, Genesis knives feature fully forged, single-piece blades made from high-carbon, no-stain German steel. Their taper-grind edges are polished by hand, and their substantial bolsters provide helpful … |
|
|
Pakka Handle Forged 2-piece Carving Set $39.99 Carving set features beautiful pakka wood handle Carving set features forged bladesKitchen accessories include storage and carrying case |
Tags: bone handle carving set, carving, handle, handle carving, handle carving board, handle carving chisels, ivory, knife, knife handle carving, ping.fm